Conformal Coating Machine with Tilt and Rotate
Specifications for SimpleCoat TR Conformal Coating Machine
Tilt and Rotate Conformal Coating Machine Specifications
MACHINE DESCRIPTION | MACHINE SPECIFICATION | |
---|---|---|
Capacity | Dispense valve | Up to 2 valves |
Spray valve | Tilt ±45•, Rotate ±90• | |
Motion Control | XYZ Axis Drive | Stepper motors plus ball screw |
XYZ Repeatability | 50 µm | |
Speed | 350 mm/sec (13.78"/sec) | |
Coating Area | XYZ Travel with 2 Valves | 394 mm x 394 mm x 50 mm (15.5" x 15.5" x 2.0") |
XYZ Travel with Spray Valve only without tilt and rotate | 457 mm x 394 mm x 50 mm (18" x 15.5" x 2.0") | |
Bottom Side Clearance | 100 mm (4") | |
Conveyor | Conveyor Type | Pin Chain |
Conveyor Width (minimum | 50 mm (2") | |
Conveyor Width (maximum) | 394 mm (15.5") | |
Edge Clearance | 6 mm (0.25") | |
Transport Height | 940 mm - 965 mm (37" - 38") | |
Communication | SMEMA | |
Facility Requirements | Air Supply | 6 bar (87 psi) dry, clean air Included: Quick disconnect for 8 mm hose |
Exhaust Port | minimum 250 CFM, 127 mm (5") diameter | |
Power | 100-240 VAC, 50/60 Hz, SIngle Phase, 10 Amp | |
Operating Control | Minimum Requirements | Customer-supplied laptop with Ethernet connection and Windows 7 or newer |
Footprint (W x D x H) | 1000 mm x 1400 mm x 1550 mm (39.37" x 55.12" x 61.02") | |
Weight (approximate) | 275 kg (605 lbs) | |
Certification | CE |