IPC APEX Expo 2020 Fluid Dispensing Info

Visit us at IPC APEX Expo 2020 - see our Full-featured Benchtop Robot, Automatic Fluid Dispensing System & Conformal Coating System

Live demos at IPC APEX Expo 2020 - Booth 3609 - February 4-6, 2020

GRAND JUNCTION, CO USA ― January 2020 ― GPD Global - manufacturer of precision fluid dispensing systems for high-volume 24/7, low-volume/high-mix, and R&D production - will exhibit in Booth 3609 at IPC APEX EXPO 2020 on February 4-6 in San Diego Convention Center.

Stop by Booth 3609 to see live demonstrations of machines and equipment. Experts will be there to discuss your production needs. Whether your project requires a pump for retrofitting or a fully automated dispense system, conformal coating, or component preparation, we have a solution for you.

LIVE DEMOS - Machines & Equipment

Benchtop Fluid Dispensing Robot

Full-featured Benchtop Fluid Dispensing Robot

Full-featured Benchtop Dispense Robot - heated work area with Underfill capability.

Conformal Coating System

Conformal Coating System with reservoirs and spray valve

Cost effective Conformal Coating System with Tilt and Rotate capability – Advanced Spray Valve with tight edge definition and lowest possible overspray.

High Precision Fluid Dispensing System

Full-featured Benchtop Fluid Dispensing Robot

High Precision Dispensing System (MAX Series) – with capabilities for microelectronics and MEMs sensors.

LIVE DEMOS - Fluid Dispensing Pumps for Integration

Latest Dispensing Technologies with Controllers for Integration

Full range of Latest Dispense Technologies with controllers for Integration:

  • Time Pressure with FPC Dispensing – enhance manual process for better dispensing results
  • Jetting NCM5000 with Controller – Simplified Jetting
  • Precision Auger with Controller Micro Volume Dispensing down to 150 µm
  • Volumetric PCD pump with Controller – Volumetric dispense pump with total fluid control, great for viscosities 0-65,000 cps, Progressive Cavity Displacement Technology

LIVE DEMOS - Thru-Hole Equipment

Component Preparation for Through-Hole Applications

  • Axial Lead Forming System (CF-8): meets exacting military standards for axial taped or bulk components while eliminating component body stress. Consistent results for components being formed either vertically or horizontally.
  • Radial Lead Forming System (CF-9): forms and cuts 2- and 3-leaded taped components, capacitors, transistors, and LEDs. This system is designed to precisely and repeatedly form standard, as well as special formed lead configurations, with consistent ease.
  • Peel Back Force Tester (PBFT): used to measure the peel back force of carrier cover tape, supplies peel force data to ensure in-spec components reels are supplied for pick & place systems.

###

GPD Global is an equipment manufacturer of high quality, precision, automated fluid dispensing, conformal coating, & component-prep systems. International, state-of-the-art equipment supplier for PCB assembly and semiconductor industries. Design and manufacture wide variety of Automatic Fluid Dispensing & Conformal Coating Systems. We also manufacture SMT Cover Tape Peel Tester and Component Prep equipment for Thru-Hole applications.